• v1.4.0-phw 1168cf4c8e

    Hello Solar Planner v1.4.0-phw
    Some checks failed
    Verify / application (push) Has been cancelled
    Stable

    phelloworld released this 2026-09-29 14:57:33 +03:00 | -14 commits to master since this release

    Hello Solar Planner v1.4.0

    Released 29 September 2026. The hosted variant is tagged v1.4.0-phw.

    Equipment choices and capacity fit

    • Choose from more sourced panel, LiFePO4 battery and MPPT controller sizes, including smaller equipment for light loads.
    • Select a panel reference alongside battery and controller references, with capacity and unit price shown in each choice.
    • Generated plans compare complete equipment combinations. Among compatible plans within 10% of the cheapest equipment cost, selection favors the smallest combined proportional excess in panel capacity, battery energy and controller output. Existing safety margins remain included.
    • See required capacity, installed capacity and excess percentages in the dashboard, PDF and CSV.
    • Distinguish named product prices, representative size estimates, user quotations and unverified allowances. Representative prices do not verify electrical specifications.
    • Unverified equipment checks start collapsed; failed checks and overall status remain visible.

    Existing projects

    Saved quotations and catalogue identities are preserved. No saved-project migration is needed. Calculate regenerates both equipment options while retaining explicit quotations, so recommendations and totals may change with the expanded catalogue and selection method. Review retained quotations when equipment changes.

    Prices are indicative African market planning estimates. A ±10% variation around the listed estimates may be used for initial budgeting; this is a planning assumption, not a measured market range or a verified comparison with global averages. Actual costs may fall outside this range. Confirm current local quotations before procurement.

    The optional budgeting variation does not automatically change totals. It is separate from both the equipment selection window and the contingency allowance.

    Validation

    Automated coverage includes capacity fit, sizing boundaries, voltage and topology constraints, integrated charging, quotations, persistence and report consistency. Desktop and mobile selector workflows and representative PDF/CSV exports were checked during implementation.

    Downloads
  • v1.4.0 81252f0bf7

    Hello Solar Planner v1.4.0
    Some checks failed
    Verify / application (push) Has been cancelled
    Stable

    phelloworld released this 2026-09-29 14:56:58 +03:00 | 1 commits to master since this release

    Hello Solar Planner v1.4.0

    Released 29 September 2026. The hosted variant is tagged v1.4.0-phw.

    Equipment choices and capacity fit

    • Choose from more sourced panel, LiFePO4 battery and MPPT controller sizes, including smaller equipment for light loads.
    • Select a panel reference alongside battery and controller references, with capacity and unit price shown in each choice.
    • Generated plans compare complete equipment combinations. Among compatible plans within 10% of the cheapest equipment cost, selection favors the smallest combined proportional excess in panel capacity, battery energy and controller output. Existing safety margins remain included.
    • See required capacity, installed capacity and excess percentages in the dashboard, PDF and CSV.
    • Distinguish named product prices, representative size estimates, user quotations and unverified allowances. Representative prices do not verify electrical specifications.
    • Unverified equipment checks start collapsed; failed checks and overall status remain visible.

    Existing projects

    Saved quotations and catalogue identities are preserved. No saved-project migration is needed. Calculate regenerates both equipment options while retaining explicit quotations, so recommendations and totals may change with the expanded catalogue and selection method. Review retained quotations when equipment changes.

    Prices are indicative African market planning estimates. A ±10% variation around the listed estimates may be used for initial budgeting; this is a planning assumption, not a measured market range or a verified comparison with global averages. Actual costs may fall outside this range. Confirm current local quotations before procurement.

    The optional budgeting variation does not automatically change totals. It is separate from both the equipment selection window and the contingency allowance.

    Validation

    Automated coverage includes capacity fit, sizing boundaries, voltage and topology constraints, integrated charging, quotations, persistence and report consistency. Desktop and mobile selector workflows and representative PDF/CSV exports were checked during implementation.

    Downloads
  • v1.3.2-phw 6f11719097

    Hello Solar Planner v1.3.2-phw
    Some checks failed
    Verify / application (push) Has been cancelled
    Stable

    phelloworld released this 2026-09-29 14:15:45 +03:00 | -5 commits to master since this release

    Hello Solar Planner 1.3.2

    Equipment pricing and comparisons are now easier to review.

    • Equipment sections show quantity × unit price = line total, with reference prices, user quotations and unverified allowances clearly identified.
    • Each system option shows whether its equipment is generated or manually edited, its installed solar capacity, and an expandable cost breakdown.
    • Calculate regenerates equipment for both options, replacing edited quantities and capacities. Entered quotations remain saved; review warnings appear when the associated equipment changes.
    • Selecting a different named product uses its reference price. Use Use reference price to remove an individual quotation.
    • Custom capacities without a matching reference retain an explicitly unverified allowance; prices are not scaled from watts or battery capacity.
    • PDF and CSV reports include the same price basis and quotation review information as the dashboard.
    • Pricing guidance now describes indicative African market planning estimates. The optional ±10% budgeting assumption does not change totals and is separate from contingency.

    Existing saved projects remain supported. Before using Calculate on a manually edited plan, save or export any equipment arrangement you want to retain.

    The partner release is v1.3.2; the Project Hello World hosted release is v1.3.2-phw.

    Downloads
  • v1.3.2 0dce9b4b58

    Hello Solar Planner v1.3.2
    Some checks failed
    Verify / application (push) Has been cancelled
    Stable

    phelloworld released this 2026-09-29 14:15:07 +03:00 | 5 commits to master since this release

    Hello Solar Planner 1.3.2

    Equipment pricing and comparisons are now easier to review.

    • Equipment sections show quantity × unit price = line total, with reference prices, user quotations and unverified allowances clearly identified.
    • Each system option shows whether its equipment is generated or manually edited, its installed solar capacity, and an expandable cost breakdown.
    • Calculate regenerates equipment for both options, replacing edited quantities and capacities. Entered quotations remain saved; review warnings appear when the associated equipment changes.
    • Selecting a different named product uses its reference price. Use Use reference price to remove an individual quotation.
    • Custom capacities without a matching reference retain an explicitly unverified allowance; prices are not scaled from watts or battery capacity.
    • PDF and CSV reports include the same price basis and quotation review information as the dashboard.
    • Pricing guidance now describes indicative African market planning estimates. The optional ±10% budgeting assumption does not change totals and is separate from contingency.

    Existing saved projects remain supported. Before using Calculate on a manually edited plan, save or export any equipment arrangement you want to retain.

    The partner release is v1.3.2; the Project Hello World hosted release is v1.3.2-phw.

    Downloads
  • v1.3.1-phw 5f704cb267

    Hello Solar Planner v1.3.1-phw
    Some checks failed
    Verify / application (push) Has been cancelled
    Stable

    phelloworld released this 2026-09-29 13:35:20 +03:00 | -2 commits to master since this release

    Hello Solar Planner v1.3.1

    Release date: 2026-09-29

    Advanced load details now follow each appliance's AC/DC type. DC appliances no longer show power factor, startup VA or AC frequency. Startup duration, supply-voltage range and startup group remain available for both types.

    Changing AC/DC updates the fields immediately while keeping results pending until Calculate. Appliance voltage and previous entries are preserved when switching types. Inactive AC details do not affect DC checks and are omitted from DC load details in PDF and CSV reports.

    Existing projects require no migration. The standalone release is v1.3.1; the hosted Project Hello World variant is v1.3.1-phw.

    Downloads
  • v1.3.1 9b4b1ae51f

    Hello Solar Planner v1.3.1
    Some checks failed
    Verify / application (push) Has been cancelled
    Stable

    phelloworld released this 2026-09-29 13:35:00 +03:00 | 6 commits to master since this release

    Hello Solar Planner v1.3.1

    Release date: 2026-09-29

    Advanced load details now follow each appliance's AC/DC type. DC appliances no longer show power factor, startup VA or AC frequency. Startup duration, supply-voltage range and startup group remain available for both types.

    Changing AC/DC updates the fields immediately while keeping results pending until Calculate. Appliance voltage and previous entries are preserved when switching types. Inactive AC details do not affect DC checks and are omitted from DC load details in PDF and CSV reports.

    Existing projects require no migration. The standalone release is v1.3.1; the hosted Project Hello World variant is v1.3.1-phw.

    Downloads
  • v1.3.0-phw 50af89c16c

    Hello Solar Planner v1.3.0-phw
    Some checks failed
    Verify / application (push) Has been cancelled
    Stable

    phelloworld released this 2026-09-29 11:53:45 +03:00 | 0 commits to master since this release

    Hello Solar Planner v1.3.0

    Release date: 2026-09-29

    More Accurate Planning

    • Equipment selection uses precise requirements before rounding values for display.
    • Fully DC and Hybrid options have independent equipment, costs and saved quotations.
    • Hybrid estimates use the selected inverter's efficiency, with an explicit manual override when needed.
    • Startup groups, power factor, startup duration and optional unloaded inverter hours support more detailed estimates.
    • Advanced settings cover battery operating and charging limits, panel temperature ratings and controller input assignments.

    Clearer Equipment Checks and Reports

    • Checks distinguish passed, failed and unverified results.
    • Entered appliance voltage and frequency are checked against inverter output. Appliance values are preserved.
    • Reports show assumptions and their sources, calculated requirements, installed capacity, usable battery energy, modeled autonomy and unresolved checks.
    • PDF and CSV remain available when equipment information is incomplete.
    • User guides focus on planning workflows; developer and validation records are kept separately.

    Existing Projects

    Saved equipment and quotations are retained for both options. Subsequent edits apply to the selected option. Use generated values refreshes that option's equipment while preserving entered price overrides.

    Projects using the previous default inverter efficiency switch to manufacturer mode. A previously customized efficiency is retained. Review the upgrade notice, calculate your loads and check the recommendations before issuing a new report.

    Calculated recommendations may change because of more precise sizing, product-specific losses and additional compatibility checks. PDF and CSV exports are records of a plan, not restorable project backups.

    Availability

    • v1.3.0: standalone planner from master.
    • v1.3.0-phw: Project Hello World hosted variant, with the tools landing page and planner at /solar/.

    Both variants use the same planning calculations. The planner remains a planning estimate and requires qualified technical review before procurement or installation.

    Downloads
  • v1.3.0 f804e69e26

    Hello Solar Planner v1.3.0
    Some checks failed
    Verify / application (push) Has been cancelled
    Stable

    phelloworld released this 2026-09-29 11:52:52 +03:00 | 7 commits to master since this release

    Hello Solar Planner v1.3.0

    Release date: 2026-09-29

    More Accurate Planning

    • Equipment selection uses precise requirements before rounding values for display.
    • Fully DC and Hybrid options have independent equipment, costs and saved quotations.
    • Hybrid estimates use the selected inverter's efficiency, with an explicit manual override when needed.
    • Startup groups, power factor, startup duration and optional unloaded inverter hours support more detailed estimates.
    • Advanced settings cover battery operating and charging limits, panel temperature ratings and controller input assignments.

    Clearer Equipment Checks and Reports

    • Checks distinguish passed, failed and unverified results.
    • Entered appliance voltage and frequency are checked against inverter output. Appliance values are preserved.
    • Reports show assumptions and their sources, calculated requirements, installed capacity, usable battery energy, modeled autonomy and unresolved checks.
    • PDF and CSV remain available when equipment information is incomplete.
    • User guides focus on planning workflows; developer and validation records are kept separately.

    Existing Projects

    Saved equipment and quotations are retained for both options. Subsequent edits apply to the selected option. Use generated values refreshes that option's equipment while preserving entered price overrides.

    Projects using the previous default inverter efficiency switch to manufacturer mode. A previously customized efficiency is retained. Review the upgrade notice, calculate your loads and check the recommendations before issuing a new report.

    Calculated recommendations may change because of more precise sizing, product-specific losses and additional compatibility checks. PDF and CSV exports are records of a plan, not restorable project backups.

    Availability

    • v1.3.0: standalone planner from master.
    • v1.3.0-phw: Project Hello World hosted variant, with the tools landing page and planner at /solar/.

    Both variants use the same planning calculations. The planner remains a planning estimate and requires qualified technical review before procurement or installation.

    Downloads